Leading provider of connectivity hardware and software products
for Wide Area Network (WAN) and voice infrastructure.
 
 
A101 Single T1/E1/J1
A102 Dual T1/E1/J1
A104 Quad T1/E1/J1
A108 Octal T1/E1/J1
A500 BRI
A200 FXO/FXS
A400 FXO/FXS
T1/E1 Tapping System
S518 ADSL
A56k/DDS
A301 T3/E3 DS3
S5141 Dual Serial
S5142 Quad Serial

Sangoma Telephony Card:
A102 Two-Port T1/E1/J1 Card

 English View Demo

PDF PDF version available in:
English English Français Français
 Español Español
 維基百科語言列表 維基百科語言列表
Deutsch Deutsch Italiano Italiano Português Português Tiếng Việt Tiếng Việt

 AFT card (PCI and PCI Express)
 
Version Interface Digital Signal Processor
102 PCI N/A
102D PCI Hardware echo canceller
102E PCI Express N/A
102DE PCI Express Hardware echo canceller
Product Identifier
 
A102DE PCI Express disassembled
 
A102 PCI
 
 Operating systems
 
  • Windows® 2000, Windows® XP, Windows® 9x, Windows® ME.
  • Linux (all versions, releases and distributions from 1.0 up).
  • FreeBSD, Open BSD, NetBSD.
  • Solaris.
 
 Voice applications
 
  • Asterisk®
  • Yate™
  • CallWeaver™
  • FreeSwitch™
 
 Line protocols
 
Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.
 
 Higher level protocols
IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE, PPPoA, IP over ATM.
 
 Diagnostic tools
 
WANPIPEMON, SNMP, System logs
 
 T1/E1 Status alarm
  • RED: Telco Red Alarm Condition.
  • OOF: Out of Frame.
  • LOS: Receive Loss of Signal.
  • AIS: Alarm Indication Signal.
  • RAI: Remote Alarm Indication (Yellow Alarm).
 
 RJ 45 E1/T1 Pinouts
Pin Signal Pin Signal
1 RTIP 4 TTIP
2 RRING 5 TRING
 
 Certification
 
  • FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950.
  • Technical certifications in Russia, Malaysia and Australia.
 
 Production quality
 
ISO 9002
 
 Warranty
 
Five years parts and labour.
 
 Contact information
 

For more information, call toll free in North America 1.800.388.2475,
direct at + 001 905 474 1990.

Request a Quote

 

The Sangoma A102 Card: two ports of optimized voice and data over T1, E1, and JI available with Telco-grade hardware echo cancellation.

Part of Sangoma’s award-winning Advanced Flexible Telecommunications product line, the A102 uses the same high-performance PCI or PCI Express interface that providing superior performance in critical systems all over the world.

The A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines.

Take advantage of hardware and software improvements, as soon as they become available. Like all cards in Sangoma’s AFT family, the A102 is field upgradable with crash-proof firmware.

Choose the Sangoma A102D and A102DE cards with Octasic®’s DSP hardware and certified algorithms to achieve carrier-grade echo cancellation and Voice Quality Enhancement functions on your open source or even proprietary telephone system.
 
Technical specifications
 
  • Two T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
  • Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
  • Support for Asterisk®, Yate™, CallWeaver™ and FreeSwitch™ PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
  • All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
  • Autosense compatibility with 5V and 3.3V PCI busses.
  • Line decoding: HDB3, AMI, B8ZS.
  • Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
  • A102-X and A102D-X PCI Express: 1 Lane PCI Express bus.
  • Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
  • Temperature range: 0–50 °C.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
  • WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.
  • WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.

 
 
©2007 Sangoma Technologies Corp. [  Request Info  ] [  Request Quote  ] [  Site Index  ] [  Careers  ] [  Privacy Policy  ] [  Contact Webmaster  ]