Please Note: The + sign means there is a connection between two wires.

601 S502/S503 back-to-back cable

• Used for back-to-back connections between two Sangoma card in the RS232 mode.
• Set both cards for Internal Clocking and set the line speeds for 56 kbps max on all cards. Note that the S508 will not run correctly on this cable.

602 card to DTE host cable (RS232)

• Used for connecting to a third party RS232 DTE host.
• Provides clocking from Sangoma Card for both the card itself and the host DTE.
• Set Sangoma card for Internal Clocking and set the line speeds for 56 kbps max on the S502 and S503 cards, 180 kbps max on the S508 cards.
• You can use this cable for Sangoma to Sangoma Back-to-back connections by connecting the Female DB25 to the Internally clocked Sangoma card and the Male DB25 (through a gender mender) to the Externally clocked Sangoma card.

607 RS232 to DCE cable for Sangoma cards

• Use for connecting S508, S503 and S502E cards to a DSU/CSU or other DTE in the RS232 mode.
• Only the pins needed for an RS232 connection are provided.
• Clocking is from the DCE, set the Sangoma card to External clocking.

608 DB25 to V.35 DCE cable for Sangoma cards

• Use for connecting S508, S503 and S502E cards to a DSU/CSU or other DTE in the V.35 mode.
• The V.35 male plug has a standard interface to all V.35 DCE devices.
• Clocking is from the DCE, set the Sangoma card to External clocking.

609 Sangoma card DB25 to V.35 host null modem cable

• Used for connecting to a third party V.35 DTE host.
• Provides clocking from Sangoma Card for both the card itself and the host DTE.
• Set Sangoma card for Internal Clocking and set the line speeds for 56 kbps max on the S502E and S503 cards, 2.6 Mbps max on the S508 cards.
• Female V.35 plug interfaces to Male DCE plug from the host device.

610 V.10/V.11 DB25 to DB25 back to back cable

• For connecting two Sangoma cards in V.35/EIA530/X.21 mode back-to-back.
• At the "Clocked Side" set the card for Internal Clocking.
• At the other side, set the card for External Clocking.
• Set the line speed on the Clocked side to 56 kbps max on the S502E and S503 cards, 2.6 Mbps max on the S508 cards.

611 DB25 to EIA530 DCE Cable for Sangoma cards

• For connecting Sangoma cards to EIA530 DCEs.

612 DB25 Wrap Plug for Testing Sangoma Cards

• Single Male DB25 plug with internal wrapping.
• For use with SNOOPER in Card Test mode.
• Run CARDTEST.BAT.

613 DB25 to X.21 cable for Sangoma Communication Boards

• DB25 male plug at one end, DB15 (ISO 4903) male plug at other end, 4ft cable.
• For connecting to X.21 DSU/CSUs.

615 RS232 cable for second DB9 port for the S508

DB25 male plug at one end, DB9 male plug at other end, 4ft cable. Pinouts as follows: DB25 male plug at one end, DB9 male plug at other end, 4ft cable. Pinouts as follows: 617 V.35 cable for S514 main port DB37 male plug at one end, 4ft cable, V.35 male plug (AMP 213300-1 9135 or equivalent). Pinouts as follows: 618 X.21 cable for S514 main port DB37 male plug at one end, DB15 (ISO 4903) male plug at other end, 4ft cable. Pinouts as follows: 619 RS232 DCE Cable for S514 card 4ft M-M cable. DB25M at one end, DB37 at the other. 620 Dual DB25 breakout adapter for S514 DB37 Male connected to two DB25 Female plugs. Cables lengths are not important, make as short as practicable. Label Primary port "P" and Secondary port "S" DB37 DB25: PRIMARY PORT DB25: SECONDARY PORT 1 4 2 5 3 7 7 4 8 5 20 6 2 7 3 8 15 9 17 10 4 11 5 12 8 13 20 14 2 15 3 16 15 17 17 18 9 19 10 20 11 21 12 22 19 23 21 24 23 25 25 26 14 27 13 28 9 29 10 30 11 31 12 32 19 33 21 34 23 35 25 36 14 37 13 622 V.11 Back-to-back cable for S514 cards 623 RJ45 back-to-back T1 cable

©2007 Sangoma Technologies Corp. [  Request Info  ] [  Request Quote  ] [  Site Index  ] [  Careers  ] [  Privacy Policy  ] [  Contact Webmaster  ]